Company: PT Megapolitan Developments Tbk
Salary: IDR 2,000,000 - IDR 3,000,000
Posted today.
Job Description
- Mampu membaca wiring listrik.
Company: Private Advertiser
Salary: IDR 4,000,000 - IDR 8,000,000
Posted today.
Job Description
- Mampu membaca wiring listrik.
Salary: IDR 4,000,000 - IDR 8,000,000
Posted today.
Job Description
- Carrying out operational and maintenance activities in the areas of the water treatment plant, boiler, compressor, genset, wastewater treatment plant, domestic wastewater treatment plant, fire pump, transformer, deep well, fire alarm, and plant perimeter CCTV.
- Performing maintenance efforts on public facilities inside and outside the building, including air conditioning in all parts of the building.
- Maintaining equipment, collecting, and updating data/records related to the use of access cards and CCTV in the plant area.
- Renewing Permits (SIO) and attending training from accredited bodies as a requirement to work in utility areas in accordance with applicable laws in Indonesia, including but not limited to Genset SIO, Boiler SIO, and POPAL.
- Receiving handover from the Project Engineer after projects in the utility and building areas are completed.
- Attending operational and maintenance training after projects in the utility and building areas are completed.
- Providing suggestions/inputs for updating the existing maintenance program if needed, as an impact of completed projects in the utility and building areas.
- Troubleshooting or resolving problems related to the performance of machines, operating systems, and facilities associated with utility and building areas.
- Ensuring the pest control program is running in the company by contracting pest control service providers, facilitating performance review meetings with pest control service providers at least once every 3 months, and discussing with the Maintenance Supervisor and/or Engineering Manager to implement recommendations from the pest control provider to improve pest protection within the company.
- Escalating to the Engineering Manager if any abnormal or non-com are found related to quality, safety, sustainability, and regulatory compliance in the utility and building areas.
- Handing over work to another technician if you are unable to perform duties during a certain period. This activity must be documented and acknowledged by all involved parties.
- Carrying out other duties/instructions not inherent to the utility and building technician position but applicable to all PT Coca-Cola Indonesia employees, such as participating in BBS (Behaviour-Based Safety), GMP (Good Manufacturing Practices), supporting audit preparation, supporting company-led modernization efforts, etc.
- Acting as backup personnel when there are no other roles/functions available within the Engineering department, in accordance with instructions from the Maintenance Supervisor or Engineering Manager.
Annual Incentive Reference Value Percentage
8
Annual Incentive reference value is a market-based competitive value for your role. It falls in the middle of the range for your role, indicating performance at target.
Technician Engineering – Kota Depok, East Java (The Coca‑Cola Company)Salary: IDR 50,000,000 - IDR 100,000,000
Posted today.
Job Description
Carry out mechanical maintenance activities in the Warehouse, Liquid Manufacturing, Liquid Filling, Dry Part Filling, CIP Kitchen, and Laboratory areas, as well as maintenance efforts for public facilities inside and outside the building.
Renew the Operational Permit (SIO) and attend training from accredited institutions as a requirement to work in the areas mentioned above, in accordance with Indonesian regulations, including but not limited to Crane SIO and Forklift SIO.
Receive handover from the Project Engineer after the completion of projects in the areas mentioned above.
Attend operational and maintenance training after projects in the areas mentioned above have been completed.
Provide suggestions/input for updates to the existing maintenance program if required, as an impact of completed projects in the areas mentioned above.
Perform troubleshooting or problem-solving related to mechanical aspects of machine and system performance in the areas mentioned above.
Carrying out other duties/instructions not inherent to the utility and building technician position but applicable to all PT Coca‑Cola Indonesia employees, such as participating in BBS (Behaviour-Based Safety), GMP (Good Manufacturing Practices), supporting audit preparation, supporting company-led modernization efforts, etc.
Acting as backup personnel when there are no other roles/functions available within the Engineering department, in accordance with instructions from the Maintenance Supervisor or Engineering Manager.
Maintenance & Repair
Perform preventive, predictive, and corrective maintenance on mechanical systems and equipment.
Diagnose and troubleshoot mechanical issues to ensure minimal downtime.
Repair or replace defective machinery components, such as genset, pumps, valves, conveyors, compressors and other mechanical systems.
Machinery Optimization
Inspect, monitor, and ensure the proper functioning of all mechanical equipment, enhancing reliability and productivity.
Carry out machine adjustments and improvements to meet production and safety standards.
Compliance & Documentation
Ensure all maintenance activities comply with company safety protocols, procedures, and industry standards.
Maintain accurate records of maintenance activities, including equipment history and service logs.
Ensure maintenance task lists to be living document by improving the strategy to get better machine performance, people and equipment safety, and product quality.
Work closely with production and other engineering teams to address and resolve mechanical issues effectively.
Provide technical guidance and support to junior technicians when necessary.
Contribute actively to address any room for improvement and amend ongoing ways of working if needed.
Spare Parts Management
Monitor inventory levels of mechanical spare parts and request procurement when required.
Ensure proper usage and storage of tools and parts to avoid misuse or waste.
Safety & Quality
Adhere to workplace health and safety standards, reporting any hazards or risks promptly.
Ensure all equipment operates in compliance with quality assurance and production specifications.
Qualifications and Experience
Technical diploma or degree in Mechanical Engineering or a related field.
6-8 years of hands‑on maintenance experience in a factory environment (FMCG experience preferred).
Strong knowledge of mechanical systems such as conveyors, gearboxes, pneumatics, hydraulics, and pumps.
Solid troubleshooting and problem‑solving skills for mechanical systems.
Familiarity with maintenance management systems and tools (e.g., SAP).
Basic understanding of electrical systems is a plus.
Experience or knowledge in creating maintenance strategies and spare part management.
Strong attention to detail with a proactive and practical approach to problem‑solving.
Excellent organizational and time management skills.
Strong communication and teamwork abilities.
High awareness of workplace safety practices and standards.
Skills
Manufacturing Maintenance; Reading Schematics; Hydraulics; Robotics; Forklift License; Lubrication Systems; Electrical Systems; Electrical Maintenance; Electronic Circuitry; PLC; Six Sigma.
Annual Incentive Reference Value Percentage
8
Annual Incentive reference value is a market-based competitive value for your role. It falls in the middle of the range for your role, indicating performance at target.
Technical Sales EngineerPosted today.
Job Description
JOB DESCRIPTION
REQUIREMENT
- Skills: Good personality, Public Speaking and Presentation, Demonstration, Competitive Analysis, Sales Skills, People Skills, Negotiation, Fast Response.
No additional job-specific content available.
#J-18808-Ljbffr