PROFILE
Experienced Power Plant Operations & Commissioning Engineer with a strong background in operating and supervising Gas Turbine (Frame 9E), HRSG, STG, and 150kV Switchyard systems, as well as Balance of Plant (BOP) facilities including Fire Fighting, Service Water, Fuel Supply, WTP, WWTP, and Auxiliary Boiler. Skilled in directing operator teams, coordinating with maintenance and third parties, issuing and auditing Work Permits (PTW), and implementing LOTO procedures to ensure safe, efficient, and compliant plant operations. Proven expertise in commissioning activities—covering auxiliary systems, compressors, boilers, chemical cleaning, steam blowing, performance testing, and synchronization—while actively contributing to ISO 9001:2015, ISO 45001, ISO 14001, SMK3, and risk management initiatives. Recognized as an Internal Auditor and Risk Champion, with hands-on experience in SOP development, quality monitoring, QCC/PSS facilitation, and safety valve re-certification, consistently driving operational reliability, compliance, and continuous improvement.
WORK EXPERIENCE
PT. Cikarang Listrindo (Jababeka Site)
As Balance of Plant Operator (BOP)
● Operated and monitored Fire Fighting System to ensure optimal and efficient performance.
● Operated and monitored Service Water System to maintain reliable and efficient operations.
● Operated and monitored Fuel Supply System for continuous and safe plant operation.
● Implemented and complied with Health, Safety, and Environmental (K3L) standards across the work area.
● Executed security and risk mitigation procedures to maintain workplace safety.
● Contributed to operational improvements through Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) initiatives.
As Water Treatment Plant (WTP) Operator
● Operated and monitored Water Treatment Plant (WTP) systems to ensure optimal and efficient performance.
● Collected and analyzed water samples from boiler, condensate, Cooling Water System, and other equipment for laboratory inspection.
● Implemented and complied with Health, Safety, and Environmental (K3L) standards across the work area.
● Executed security and risk prevention procedures to maintain operational safety.
● Contributed to operational improvements through Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) initiatives.
As 150 KV Operator
● Operated and monitored 150kV / Switchyard systems to ensure optimal and efficient performance.
● Executed Block Operator commands in alignment with required operating conditions.
● Performed switchyard operations and maneuvers in coordination with Shift Supervisor/Block Operator, ensuring compliance with standard operating procedures.
● Prepared and submitted accurate operational reports to support system performance tracking.
● Implemented and adhered to Health, Safety, and Environmental (K3L) procedures within the work area.
● Executed security and risk mitigation measures to maintain safe and reliable operations.
● Supported continuous improvement initiatives through participation in Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) programs.
As Assistant Blok (GTG Frame #9 & HRSG) Operator
● Operated Frame 9E Gas Turbine (GTG), Heat Recovery Steam Generator (HRSG), and supporting equipment in compliance with standard operating procedures.
● Monitored and recorded operational parameters, maintaining accurate logbook documentation of GTG/HRSG activities.
● Prepared and executed Work Permit–related operations within the GTG and HRSG areas.
● Ensured compliance with Health, Safety, and Environmental (K3L) procedures in all operational activities.
● Implemented security and safety protocols at Blok III to safeguard plant operations.
● Supported process and operational improvements through participation in Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) initiatives.
As Blok (GTG Frame #9 & HRSG) Operator
● Oversaw daily power plant operations in Block III, ensuring compliance with procedures and achieving optimal performance levels.
● Supervised and directed Assistant Block III Operators and STG Field Operators to maintain safe and efficient plant operations in line with SOPs and safety standards.
● Prepared and executed Work Permit operations for GTG, HRSG, and STG areas within Block III.
● Conducted daily, weekly, and monthly testing on critical equipment to ensure reliability and operational readiness.
● Enforced Health, Safety, and Environmental (K3L) procedures across the work area.
● Implemented security and risk prevention measures at Block III to maintain safe plant operations.
● Contributed to process and operational improvements through Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) initiatives.
As Controller Blok III (GTG Frame #9, HRSG & STG) Operator
● Coordinated daily operations of Block III Power Plant, ensuring compliance with procedures and achieving optimum performance.
● Supervised and directed Block Operator III, Assistant Block III, and STG Field Operators to maintain safe and efficient plant operations in line with SOPs and safety standards.
● Collaborated with the maintenance department and third-party contractors to support operational needs, including:
● Issuing and managing Work Permits.
● Coordinating equipment isolation (LOTO – Lock Out & Tag Out) with operators.
● Prepared and submitted accurate operational reports on routine activities and promptly reported interruptions or abnormalities.
● Enforced and complied with Health, Safety, and Environmental (K3L) standards across the work area.
● Implemented security and risk prevention measures within Block III operations.
● Actively contributed to process improvements through Quality Control Cycle (QCC) and Perbaikan Sumbang Saran (PSS) initiatives.
As Acting Tech Engineer for Babelan Site
·
Conducted commissioning activities for key systems, including:
· Auxiliary Boiler
· Atlas Copco Compressor
· Fire Fighting System
· Closed Cooling System
· Chemical Cleaning
· Steam Blowing (Unit 1 & Unit 2)
· Applied knowledge of troubleshooting and problem-solving to ensure smooth and reliable operations.
· Served as part of the Commissioning Team for CFB Boiler Units 1 & 2, covering:
· Mechanical and Electrical Testing
· Chemical Cleaning
· Steam Blowing
· Boiler Commissioning & Performance Testing
· Synchronization with grid/system
As Tech Engineer for Babelan Site
·
Actively involved in ISO 9001:2015 implementation at Babelan site, including:
· Developing and reviewing Standard Operating Procedures (SOPs) for all main plant systems.
· Creating and reviewing Work Instructions, Check Sheets, and Job Descriptions.
· Reviewing Quality Monitoring in Plant Operations Department.
· Conducted follow-up on equipment abnormalities within Main Plant Operations Department.
· Performed PTW (Permit to Work) audits to ensure compliance with safety and operational standards.
· Served as facilitator for Quality Control Circle (QCC) initiatives to drive continuous improvement.
· Created and monitored periodic work schedules for equipment changeover and running tests in Plant Operations.
· Conducted Safety Valve testing (Trevi test & bench test) for Boiler #1 & #2 re-certification.
As BOP Operation Engineer for Babelan Site
·
Actively involved in ISO Occupational Health & Safety), ISO Environmental Management), and Risk Management implementation.
· Served as Internal Auditor for ISO 45001 & SMK3.
· Acted as departmental Risk Champion, analyzing risks in power generation activities and recommending mitigation actions.
· Planned, inspected, analyzed, and provided improvement recommendations for Balance of Plant (BOP) systems, including:
· Firefighting System
· Water Treatment Plant (WTP) & Waste Water Treatment Plant (WWTP)
· Auxiliary Boiler
EDUCATION
Politeknik Negeri Malang
Bachelor's degree
Mechanical Engineering
TRAINING, SEMINARS & CERTIFICATIONS
Completed extensive professional development in power plant operations, safety, and management, including training on Gas Turbine & Generator operations (Frame 9, Combine Cycle, Boiler CYMIC Valmet), Water Treatment Plant (WTP), Compressor systems, Cooling Tower, Rotating Equipment, Relay Protection, DCS Emerson, SCADA GIS, HV Electrical Equipment, and CEMS. Certified in Operational Competency, ISO 9001:2008, ISO 14001, OHSAS 18001, Risk Management, HSE Management Systems, and First Aid. Additional training in Blackout Recovery & Emergency Response, Work Permit Procedures, QCC/PDCA, Supervisory Development, Leadership, and Productivity Improvement Programs.
SKILLS
Operational: Skilled in preparing SOPs, Work Instructions, and Check Sheets.
Mechanical: Proficient in P&ID and isometric drawings, hydrotest, bump test, alignment, vibration test, and solo run test.
Electrical: Experienced with single line diagrams, magger, termination, and insulation testing; operation of panels at 150kV, 20kV, 6.3kV, and 380V.
Instrumentation: Familiar with logic diagrams and industrial devices (transmitters, transducers, control valves, solenoids, controllers, switches, gauges, etc.); proficient in P&ID and process flow diagrams.
Software: Proficient in Microsoft Office, Alfresco, Maximo (as PICO), Sigma Air Management Automation, and Windows OS.